• 返回顶部
  • 电话咨询
    13456828878
  • 烫钻衣服如何保养?

    本站编辑:浙江富知源机械设备有限公司发布日期:2022-04-13 11:37 浏览次数:

    蒸汽挂烫机在熨裤子时,用普通衣架挂在上面进行熨烫,并且比较好戴上防烫手套。

    烫衣服下摆时,抓住衣服两侧,拉紧进行压烫,警惕蒸汽喷头的热蒸汽。

    在烫衣领时,一般要把优先子翻过去,从背面进行熨烫,这样比较容易。烫到衣服袖子的时候要稍微用力把袖子拉直,蒸汽喷头压在袖子折连的时间也要长一点,来回压烫。

    尽量不要缺水,尽管内部有温控等保护措施,但还是要注意。在使用一段时间后,感到气量小,就用白醋与水1∶1混合后,从进水处灌入,反复摇晃,把机器底部的除垢阀门打开,放掉即可,再用清水冲洗几次,直到基本没有醋的味道。

    熨烫衣物的技巧,厚实的衣物就用大的功率,真丝等轻薄的衣物就用小的功率,贴近点,速度慢点。

    另外,烫裤子的时候,可以用喷夹,如果没有,可以把裤子放在一个平面上,用平滑的金属喷头,来代替平板熨斗,实现压烫平整。

    使用完成后,套用专业防尘罩,以免落土,并能防止外部塑料彩色部分退色或变黄。

    When the steam hanging ironing machine irons pants, it uses an ordinary clothes hanger to hang on it for ironing, and it is best to wear anti ironing gloves.

    When ironing the hem of clothes, grasp the two sides of clothes, press them tightly, and be alert to the hot steam of steam nozzle.

    When ironing the collar, it is generally easy to turn the collar over and iron it from the back. When ironing the sleeves of clothes, you should straighten the sleeves with a little force, and the steam nozzle should be pressed on the sleeves for a longer time, pressing and ironing back and forth.

    Try not to be short of water. Although there are temperature control and other protection measures inside, you should still pay attention to it. After using for a period of time, if you feel that the air volume is small, mix white vinegar with water 1:1, pour it from the water inlet, shake it repeatedly, open the descaling valve at the bottom of the machine, let it go, and then rinse it with clean water for several times until there is basically no taste of vinegar.

    The skill of ironing clothes: use high power for thick clothes, and use low power for light and thin clothes such as silk. Get closer and slow down.

    In addition, when ironing pants, you can use spray clip. If not, you can put the pants on a flat surface and use a smooth metal nozzle to replace the flat iron to achieve flat ironing.

    After use, apply a professional dust cover to avoid falling soil and prevent the color part of the external plastic from fading or turning yellow.